Free Santa Cam SVG

Santa Cam stencil plate SVG

Santa Cam stencil plate, as a solid black shape — Santa Cam stencil plate. The preview is the SVG file itself.

A rounded plate with “SANTA CAM” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 92 mm (3.94 × 3.64 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	9: 1 outer edge and 8 cut-outs
Cut length	1,551 mm at this size
Narrowest part	1.5 mm at this size
Nodes	226 curve and line segments

Measured from the file. PNG: 2,000 × 1,854 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.92 in (25 × 23 mm)	0.38 mm	394 mm	100	Too fine for most machines
2 × 1.85 in (51 × 47 mm)	0.76 mm	788 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.77 in (76 × 70 mm)	1.1 mm	1,182 mm	12	Vinyl, card and thin sheet
4 × 3.7 in (102 × 94 mm)	1.5 mm	1,576 mm	6	Vinyl, card and thin sheet
6 × 5.54 in (152 × 141 mm)	2.3 mm	2,364 mm	2	Vinyl, card and thin sheet
8 × 7.39 in (203 × 188 mm)	3 mm	3,152 mm	1	Any material, including 3 mm wood and acrylic
12 × 11.09 in (305 × 282 mm)	4.6 mm	4,727 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa Cam SVG files

← Santa Cam outline lettering All 12 Santa Cam designs Santa Cam with a drop shadow →