Free Santa Cam SVG

Santa Cam in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa Cam in Lobster, as a solid black shape
Santa Cam in Lobster. The preview is the SVG file itself.

“Santa Cam” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 91 mm (3.94 × 3.6 in), scales to any size
Pieces3 separate pieces
Outlines to cut6: 3 outer edges and 3 cut-outs
Cut length999 mm at this size
Narrowest part1.7 mm at this size
Nodes222 curve and line segments

Measured from the file. PNG: 2,000 × 1,835 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.91 in (25 × 23 mm)0.43 mm254 mm100Too fine for most machines
2 × 1.83 in (51 × 46 mm)0.86 mm507 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.74 in (76 × 70 mm)1.3 mm761 mm12Vinyl, card and thin sheet
4 × 3.66 in (102 × 93 mm)1.7 mm1,015 mm6Vinyl, card and thin sheet
6 × 5.48 in (152 × 139 mm)2.6 mm1,522 mm2Vinyl, card and thin sheet
8 × 7.31 in (203 × 186 mm)3.5 mm2,030 mm1Any material, including 3 mm wood and acrylic
12 × 10.97 in (305 × 279 mm)5.2 mm3,045 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa Cam SVG files

← Santa Cam in Pacifico All 13 Santa Cam designs Santa Cam in Kaushan Script →