Free Santa Cam SVG

Santa Cam in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Santa Cam in Pacifico, as a solid black shape
Santa Cam in Pacifico. The preview is the SVG file itself.

“Santa Cam” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 97 mm (3.94 × 3.83 in), scales to any size
Pieces3 separate pieces
Outlines to cut7: 3 outer edges and 4 cut-outs
Cut length972 mm at this size
Narrowest part2.4 mm at this size
Nodes255 curve and line segments

Measured from the file. PNG: 2,000 × 1,946 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.61 mm247 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.94 in (51 × 49 mm)1.2 mm494 mm25Vinyl, card and thin sheet
3 × 2.92 in (76 × 74 mm)1.8 mm741 mm9Vinyl, card and thin sheet
4 × 3.89 in (102 × 99 mm)2.4 mm988 mm4Vinyl, card and thin sheet
6 × 5.83 in (152 × 148 mm)3.7 mm1,481 mm2Any material, including 3 mm wood and acrylic
8 × 7.78 in (203 × 198 mm)4.9 mm1,975 mm1Any material, including 3 mm wood and acrylic
12 × 11.66 in (305 × 296 mm)7.3 mm2,963 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Santa Cam SVG files

← Santa Cam with a Santa hat All 13 Santa Cam designs Santa Cam in Lobster →