Free ruler SVG

Shirt placement ruler for a chest logo SVG

Shirt placement ruler for a chest logo, as a solid black shape
Shirt placement ruler for a chest logo. The preview is the SVG file itself.

An L-shaped guide for a left chest design: one arm lies along the centre of the shirt and the other across it. Both arms are notched every 10 mm when the long arm is 100 mm.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 70 mm (3.94 × 2.76 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length533 mm at this size
Narrowest part5.4 mm at this size
Nodes69 curve and line segments

Measured from the file. PNG: 2,000 × 1,423 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.7 in (25 × 18 mm)1.4 mm135 mm130Vinyl, card and thin sheet
2 × 1.4 in (51 × 36 mm)2.7 mm271 mm35Vinyl, card and thin sheet
3 × 2.1 in (76 × 53 mm)4.1 mm406 mm15Any material, including 3 mm wood and acrylic
4 × 2.8 in (102 × 71 mm)5.5 mm542 mm8Any material, including 3 mm wood and acrylic
6 × 4.2 in (152 × 107 mm)8.2 mm812 mm2Any material, including 3 mm wood and acrylic
8 × 5.6 in (203 × 142 mm)11 mm1,083 mm2Any material, including 3 mm wood and acrylic
12 × 8.4 in (305 × 213 mm)16 mm1,625 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ruler SVG files

← V-neck T-shirt ruler All 16 rulers Growth chart ruler marks →