Free ruler SVG

Folding carpenter’s ruler SVG

Folding carpenter’s ruler, as a solid black shape
Folding carpenter’s ruler. The preview is the SVG file itself.

A wooden folding ruler opened into a zigzag of four arms, with a rivet at each joint and notches along one edge of every arm. For a joiner, a builder or a workshop sign.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 73 mm (3.94 × 2.89 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length732 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes156 curve and line segments

Measured from the file. PNG: 2,000 × 1,487 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.73 in (25 × 19 mm)Over 1.5 mm186 mm130Vinyl, card and thin sheet
2 × 1.47 in (51 × 37 mm)Over 3 mm372 mm35Any material, including 3 mm wood and acrylic
3 × 2.2 in (76 × 56 mm)Over 4.6 mm558 mm15Any material, including 3 mm wood and acrylic
4 × 2.93 in (102 × 74 mm)Over 6.1 mm744 mm6Any material, including 3 mm wood and acrylic
6 × 4.4 in (152 × 112 mm)Over 9.1 mm1,116 mm2Any material, including 3 mm wood and acrylic
8 × 5.86 in (203 × 149 mm)Over 12 mm1,487 mm2Any material, including 3 mm wood and acrylic
12 × 8.8 in (305 × 223 mm)Over 18 mm2,231 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ruler SVG files

← Half-circle protractor ruler All 16 rulers Ruler and pencil crossed →