Free ruler SVG

Growth chart ruler marks SVG

Growth chart ruler marks, as a solid black shape
Growth chart ruler marks. The preview is the SVG file itself.

Thirteen ruler marks in a column for one foot of a growth chart: long at the foot lines, medium at the half and short at each inch between. Loose pieces. Scale until the two long marks are 12 inches apart, then repeat up the board.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size32 × 100 mm (1.26 × 3.94 in), scales to any size
Pieces13 separate pieces
Outlines to cut13 outlines
Cut length486 mm at this size
Narrowest part2.6 mm at this size
Nodes78 curve and line segments

Measured from the file. PNG: 692 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.32 × 1 in (8 × 25 mm)0.66 mm123 mm230Fine detail: vinyl and paper only, weed with care
0.64 × 2 in (16 × 51 mm)1.3 mm247 mm70Vinyl, card and thin sheet
0.96 × 3 in (24 × 76 mm)2 mm370 mm30Vinyl, card and thin sheet
1.28 × 4 in (33 × 102 mm)2.6 mm494 mm16Vinyl, card and thin sheet
1.92 × 6 in (49 × 152 mm)4 mm741 mm5Any material, including 3 mm wood and acrylic
2.56 × 8 in (65 × 203 mm)5.3 mm988 mm4Any material, including 3 mm wood and acrylic
3.84 × 12 in (98 × 305 mm)7.9 mm1,481 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More ruler SVG files

← Shirt placement ruler for a chest logo All 16 rulers Set square ruler →