Free rottweiler SVG

Rottweiler paw print badge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rottweiler paw print badge. The preview is the SVG file itself.

A paw print with the rottweiler face in place of the big pad and four toe pads above it. Five loose pieces set out in position, for car windows, kennel signs and the back of a hoodie.

What is in the file

Size	100 × 90 mm (3.94 × 3.54 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	14: 5 outer edges and 9 cut-outs
Cut length	741 mm at this size
Narrowest part	1.8 mm at this size
Nodes	168 curve and line segments

Measured from the file. PNG: 2,000 × 1,808 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.9 in (25 × 23 mm)	0.46 mm	188 mm	110	Too fine for most machines
2 × 1.8 in (51 × 46 mm)	0.91 mm	376 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.7 in (76 × 69 mm)	1.4 mm	565 mm	12	Vinyl, card and thin sheet
4 × 3.6 in (102 × 91 mm)	1.8 mm	753 mm	6	Vinyl, card and thin sheet
6 × 5.4 in (152 × 137 mm)	2.7 mm	1,129 mm	2	Vinyl, card and thin sheet
8 × 7.2 in (203 × 183 mm)	3.7 mm	1,506 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.8 in (305 × 274 mm)	5.5 mm	2,259 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rottweiler SVG files

← Rottweiler outline All 13 rottweilers Rottweiler monogram frame →