Free rottweiler SVG

Rottweiler outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rottweiler outline, drawn as a line
Rottweiler outline. The preview is the SVG file itself.

The standing rottweiler as one even line about 2 mm wide in a closed loop, with nothing inside it. For colouring pages, foil, engraving and pen plotters.

What is in the file

Size100 × 66 mm (3.94 × 2.6 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length790 mm at this size
Narrowest part3.5 mm at this size
Nodes303 curve and line segments

Measured from the file. PNG: 2,000 × 1,346 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.89 mm201 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.32 in (51 × 34 mm)1.8 mm401 mm40Vinyl, card and thin sheet
3 × 1.98 in (76 × 50 mm)2.7 mm602 mm15Vinyl, card and thin sheet
4 × 2.64 in (102 × 67 mm)3.6 mm803 mm8Any material, including 3 mm wood and acrylic
6 × 3.96 in (152 × 101 mm)5.3 mm1,204 mm2Any material, including 3 mm wood and acrylic
8 × 5.28 in (203 × 134 mm)7.1 mm1,605 mm2Any material, including 3 mm wood and acrylic
12 × 7.92 in (305 × 201 mm)11 mm2,408 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rottweiler SVG files

← Rottweiler sitting on a bone All 13 rottweilers Rottweiler paw print badge →