Free rottweiler SVG

Peeking rottweiler SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Peeking rottweiler, as a solid black shape
Peeking rottweiler. The preview is the SVG file itself.

The top of a rottweiler face looking over a ledge: small folded ears, shining eyes with a tan spot over each, the tops of the tan cheeks and two paws hooked over the edge. For car windows and mugs.

What is in the file

Size100 × 46 mm (3.94 × 1.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length602 mm at this size
Narrowest part1.1 mm at this size
Nodes172 curve and line segments

Measured from the file. PNG: 2,000 × 965 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.46 in (25 × 12 mm)0.28 mm153 mm180Too fine for most machines
2 × 0.92 in (51 × 23 mm)0.56 mm306 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.39 in (76 × 35 mm)0.84 mm459 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.85 in (102 × 47 mm)1.1 mm612 mm10Vinyl, card and thin sheet
6 × 2.77 in (152 × 70 mm)1.7 mm917 mm4Vinyl, card and thin sheet
8 × 3.7 in (203 × 94 mm)2.2 mm1,223 mm3Vinyl, card and thin sheet
12 × 5.54 in (305 × 141 mm)3.4 mm1,835 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rottweiler SVG files

← Rottweiler monogram frame All 13 rottweilers Layered rottweiler face in five colours →