Free rolled flower SVG

Rolled flower rose spiral SVG

Rolled flower rose spiral, as a solid black shape
Rolled flower rose spiral. The preview is the SVG file itself.

A spiral strip with round-topped petals that grow from 11 mm wide at the centre to 20 mm at the outer end, four turns round a glue pad 20 mm across. Rolled from the outer tip inwards it makes a rose about 35 mm across.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 97 mm (3.94 × 3.82 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length1,749 mm at this size
Narrowest part2.2 mm at this size
Nodes432 curve and line segments

Measured from the file. PNG: 2,000 × 1,942 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.97 in (25 × 25 mm)0.56 mm444 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.94 in (51 × 49 mm)1.1 mm888 mm25Vinyl, card and thin sheet
3 × 2.91 in (76 × 74 mm)1.7 mm1,333 mm9Vinyl, card and thin sheet
4 × 3.88 in (102 × 99 mm)2.2 mm1,777 mm4Vinyl, card and thin sheet
6 × 5.82 in (152 × 148 mm)3.4 mm2,665 mm2Any material, including 3 mm wood and acrylic
8 × 7.76 in (203 × 197 mm)4.5 mm3,554 mm1Any material, including 3 mm wood and acrylic
12 × 11.64 in (305 × 296 mm)6.7 mm5,331 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rolled flower SVG files

← Rolled flower in two colours All 12 rolled flowers Simple rolled flower spiral →