Free rolled flower SVG

Rolled flower in two colours SVG

Rolled flower in two colours, in layered colours
Rolled flower in two colours. The preview is the SVG file itself.

Two spirals to roll together, one inside the other: a rose spiral and a smaller pointed one for the centre, in a second colour. Roll each, then glue the small one into the middle of the large.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 68 mm (3.94 × 2.69 in), scales to any size
Pieces2 separate pieces
Outlines to cut5: 2 outer edges and 3 cut-outs
Cut length1,723 mm at this size
Narrowest part2.7 mm at this size
Nodes664 curve and line segments
Layers2: outer petals and centre

Measured from the file. PNG: 2,000 × 1,392 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.68 in (25 × 17 mm)0.69 mm438 mm130Fine detail: vinyl and paper only, weed with care
2 × 1.37 in (51 × 35 mm)1.4 mm875 mm35Vinyl, card and thin sheet
3 × 2.05 in (76 × 52 mm)2.1 mm1,313 mm15Vinyl, card and thin sheet
4 × 2.74 in (102 × 69 mm)2.7 mm1,751 mm8Vinyl, card and thin sheet
6 × 4.1 in (152 × 104 mm)4.1 mm2,626 mm2Any material, including 3 mm wood and acrylic
8 × 5.47 in (203 × 139 mm)5.5 mm3,501 mm2Any material, including 3 mm wood and acrylic
12 × 8.21 in (305 × 208 mm)8.2 mm5,252 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rolled flower SVG files

← Rolled flower pair in two sizes All 12 rolled flowers Rolled flower rose spiral →