Free rolled flower SVG

Rolled flower with pointed petals SVG

Rolled flower with pointed petals, as a solid black shape
Rolled flower with pointed petals. The preview is the SVG file itself.

A spiral with a zigzag of pointed petals 14 mm wide, four turns, rolling the other way from the rose. Pointed petals make a dahlia or a succulent, depending on the colour of the card.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.86 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length1,903 mm at this size
Narrowest part1.3 mm at this size
Nodes704 curve and line segments

Measured from the file. PNG: 2,000 × 1,963 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.33 mm483 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.66 mm967 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.94 in (76 × 75 mm)0.99 mm1,450 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.92 in (102 × 100 mm)1.3 mm1,933 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)2 mm2,900 mm2Vinyl, card and thin sheet
8 × 7.85 in (203 × 199 mm)2.6 mm3,867 mm1Vinyl, card and thin sheet
12 × 11.77 in (305 × 299 mm)4 mm5,800 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rolled flower SVG files

← Rolled flower with a wavy edge All 12 rolled flowers Rolled flower carnation spiral →