Free rolled flower SVG

Rolled flower with a wavy edge SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rolled flower with a wavy edge, as a solid black shape
Rolled flower with a wavy edge. The preview is the SVG file itself.

A spiral whose edge rises and falls in a soft wave, five turns of a narrower strip. The wave gives a ruffled, full flower like a peony or a garden rose.

What is in the file

Size100 × 98 mm (3.94 × 3.85 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut3: 1 outer edge and 2 cut-outs
Cut length2,088 mm at this size
Narrowest part1.3 mm at this size
Nodes384 curve and line segments

Measured from the file. PNG: 2,000 × 1,958 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.33 mm530 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.66 mm1,061 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.93 in (76 × 75 mm)0.99 mm1,591 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.91 in (102 × 99 mm)1.3 mm2,121 mm4Vinyl, card and thin sheet
6 × 5.87 in (152 × 149 mm)2 mm3,182 mm2Vinyl, card and thin sheet
8 × 7.82 in (203 × 199 mm)2.6 mm4,243 mm1Vinyl, card and thin sheet
12 × 11.74 in (305 × 298 mm)4 mm6,364 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rolled flower SVG files

← Simple rolled flower spiral All 12 rolled flowers Rolled flower with pointed petals →