Free Ring Bearer SVG

Ring Bearer stencil plate SVG

Ring Bearer stencil plate, as a solid black shape — Ring Bearer stencil plate. The preview is the SVG file itself.

A rounded plate with “RING BEARER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 82 mm (3.94 × 3.23 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	1,523 mm at this size
Narrowest part	1.2 mm at this size
Nodes	294 curve and line segments

Measured from the file. PNG: 2,000 × 1,656 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.82 in (25 × 21 mm)	0.3 mm	387 mm	110	Too fine for most machines
2 × 1.64 in (51 × 42 mm)	0.61 mm	774 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.46 in (76 × 63 mm)	0.91 mm	1,161 mm	12	Fine detail: vinyl and paper only, weed with care
4 × 3.28 in (102 × 83 mm)	1.2 mm	1,547 mm	6	Vinyl, card and thin sheet
6 × 4.93 in (152 × 125 mm)	1.8 mm	2,321 mm	2	Vinyl, card and thin sheet
8 × 6.57 in (203 × 167 mm)	2.4 mm	3,095 mm	1	Vinyl, card and thin sheet
12 × 9.85 in (305 × 250 mm)	3.7 mm	4,642 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ring Bearer SVG files

← Ring Bearer outline lettering All 12 Ring Bearer designs Ring Bearer with a drop shadow →