Free Ring Bearer SVG

Ring Bearer in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ring Bearer in Lilita One, as a solid black shape
Ring Bearer in Lilita One. The preview is the SVG file itself.

“Ring Bearer” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 64 mm (3.94 × 2.53 in), scales to any size
Pieces11 separate pieces
Outlines to cut18: 11 outer edges and 7 cut-outs
Cut length858 mm at this size
Narrowest part3.7 mm at this size
Nodes223 curve and line segments

Measured from the file. PNG: 2,000 × 1,313 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.64 in (25 × 16 mm)0.94 mm218 mm140Fine detail: vinyl and paper only, weed with care
2 × 1.29 in (51 × 33 mm)1.9 mm436 mm40Vinyl, card and thin sheet
3 × 1.93 in (76 × 49 mm)2.8 mm654 mm15Vinyl, card and thin sheet
4 × 2.57 in (102 × 65 mm)3.8 mm872 mm8Any material, including 3 mm wood and acrylic
6 × 3.86 in (152 × 98 mm)5.6 mm1,308 mm3Any material, including 3 mm wood and acrylic
8 × 5.14 in (203 × 131 mm)7.5 mm1,743 mm2Any material, including 3 mm wood and acrylic
12 × 7.72 in (305 × 196 mm)11 mm2,615 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ring Bearer SVG files

← Ring Bearer in Kaushan Script All 13 Ring Bearer designs Ring Bearer in Alfa Slab One →