Free Ring Bearer SVG

Ring Bearer outline lettering SVG

Ring Bearer outline lettering, drawn as a line — Ring Bearer outline lettering. The preview is the SVG file itself.

“Ring Bearer” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 61 mm (3.94 × 2.41 in), scales to any size
Pieces	17 separate pieces
Outlines to cut	35: 17 outer edges and 18 cut-outs
Cut length	1,544 mm at this size
Narrowest part	1.4 mm at this size
Nodes	429 curve and line segments

Measured from the file. PNG: 2,000 × 1,254 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.61 in (25 × 16 mm)	0.36 mm	392 mm	150	Too fine for most machines
2 × 1.22 in (51 × 31 mm)	0.71 mm	784 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.84 in (76 × 47 mm)	1.1 mm	1,177 mm	15	Vinyl, card and thin sheet
4 × 2.45 in (102 × 62 mm)	1.4 mm	1,569 mm	8	Vinyl, card and thin sheet
6 × 3.67 in (152 × 93 mm)	2.1 mm	2,353 mm	3	Vinyl, card and thin sheet
8 × 4.9 in (203 × 124 mm)	2.8 mm	3,137 mm	2	Vinyl, card and thin sheet
12 × 7.34 in (305 × 187 mm)	4.3 mm	4,706 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ring Bearer SVG files

← Ring Bearer with stars All 12 Ring Bearer designs Ring Bearer stencil plate →