Free Ring Bearer SVG

Ring Bearer in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Ring Bearer in Lobster, as a solid black shape
Ring Bearer in Lobster. The preview is the SVG file itself.

“Ring Bearer” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 82 mm (3.94 × 3.21 in), scales to any size
Pieces6 separate pieces
Outlines to cut11: 6 outer edges and 5 cut-outs
Cut length1,090 mm at this size
Narrowest part1.4 mm at this size
Nodes257 curve and line segments

Measured from the file. PNG: 2,000 × 1,644 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.82 in (25 × 21 mm)0.36 mm277 mm120Too fine for most machines
2 × 1.63 in (51 × 41 mm)0.71 mm554 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.44 in (76 × 62 mm)1.1 mm831 mm12Vinyl, card and thin sheet
4 × 3.26 in (102 × 83 mm)1.4 mm1,107 mm6Vinyl, card and thin sheet
6 × 4.89 in (152 × 124 mm)2.1 mm1,661 mm2Vinyl, card and thin sheet
8 × 6.52 in (203 × 166 mm)2.8 mm2,215 mm1Vinyl, card and thin sheet
12 × 9.78 in (305 × 248 mm)4.3 mm3,322 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Ring Bearer SVG files

← Ring Bearer in Pacifico All 13 Ring Bearer designs Ring Bearer in Kaushan Script →