Free rhino SVG

Rhino on a name plaque SVG

Rhino on a name plaque, as a solid black shape — Rhino on a name plaque. The preview is the SVG file itself.

The rhino standing on a long blank bar, wide enough for a child’s name or a short saying. Cut the lettering out of the bar, engrave it, or stick it on in a second colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 73 mm (3.94 × 2.87 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	578 mm at this size
Narrowest part	2.6 mm at this size
Nodes	201 curve and line segments

Measured from the file. PNG: 2,000 × 1,477 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.73 in (25 × 18 mm)	0.66 mm	147 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.46 in (51 × 37 mm)	1.3 mm	294 mm	35	Vinyl, card and thin sheet
3 × 2.18 in (76 × 55 mm)	2 mm	440 mm	15	Vinyl, card and thin sheet
4 × 2.91 in (102 × 74 mm)	2.6 mm	587 mm	6	Vinyl, card and thin sheet
6 × 4.37 in (152 × 111 mm)	4 mm	881 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.82 in (203 × 148 mm)	5.3 mm	1,174 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.74 in (305 × 222 mm)	7.9 mm	1,762 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rhino SVG files

← Rhino on the savanna in a ring All 13 rhinos Rhino outline →