Free rhino SVG

Rhino face from the front SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Rhino face from the front, as a solid black shape
Rhino face from the front. The preview is the SVG file itself.

A rhino facing you: the front horn rising high above a long face, ears at the top corners, small eyes set wide, wrinkles on the cheeks and a broad mouth with two nostrils. Exactly symmetrical.

What is in the file

Size57 × 100 mm (2.22 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length867 mm at this size
Narrowest part1.3 mm at this size
Nodes249 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,163 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.57 × 1 in (14 × 25 mm)0.33 mm220 mm150Too fine for most machines
1.13 × 2 in (29 × 51 mm)0.66 mm440 mm45Fine detail: vinyl and paper only, weed with care
1.7 × 3 in (43 × 76 mm)0.99 mm661 mm18Fine detail: vinyl and paper only, weed with care
2.26 × 4 in (57 × 102 mm)1.3 mm881 mm8Vinyl, card and thin sheet
3.39 × 6 in (86 × 152 mm)2 mm1,321 mm3Vinyl, card and thin sheet
4.52 × 8 in (115 × 203 mm)2.6 mm1,762 mm2Vinyl, card and thin sheet
6.78 × 12 in (172 × 305 mm)4 mm2,643 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rhino SVG files

← Rhino head from the side All 13 rhinos Baby rhino calf →