Free rhino SVG

Rhino head from the side SVG

Rhino head from the side, as a solid black shape
Rhino head from the side. The preview is the SVG file itself.

The head and neck of a rhino in profile, cut off behind the shoulder hump: both horns, both ears, the eye, the nostril, the mouth and one fold of skin on the neck. For a plaque or a sign.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 80 mm (3.94 × 3.15 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length585 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes205 curve and line segments

Measured from the file. PNG: 2,000 × 1,613 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.8 in (25 × 20 mm)Over 1.5 mm149 mm120Vinyl, card and thin sheet
2 × 1.6 in (51 × 41 mm)Over 3 mm297 mm30Any material, including 3 mm wood and acrylic
3 × 2.4 in (76 × 61 mm)Over 4.6 mm446 mm12Any material, including 3 mm wood and acrylic
4 × 3.2 in (102 × 81 mm)Over 6.1 mm594 mm6Any material, including 3 mm wood and acrylic
6 × 4.79 in (152 × 122 mm)Over 9.1 mm892 mm2Any material, including 3 mm wood and acrylic
8 × 6.39 in (203 × 162 mm)Over 12 mm1,189 mm1Any material, including 3 mm wood and acrylic
12 × 9.59 in (305 × 244 mm)Over 18 mm1,783 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rhino SVG files

← Charging rhino All 13 rhinos Rhino face from the front →