Free rhino SVG

Rhino outline SVG

Rhino outline, drawn as a line — Rhino outline. The preview is the SVG file itself.

The standing rhino drawn as one even line about 2 mm wide, with the gaps between the legs left open: horns, ears, hump, feet and tail. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 58 mm (3.94 × 2.3 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	848 mm at this size
Narrowest part	1.9 mm at this size
Nodes	391 curve and line segments

Measured from the file. PNG: 2,000 × 1,198 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.58 in (25 × 15 mm)	0.48 mm	215 mm	150	Too fine for most machines
2 × 1.17 in (51 × 30 mm)	0.97 mm	431 mm	40	Fine detail: vinyl and paper only, weed with care
3 × 1.75 in (76 × 44 mm)	1.4 mm	646 mm	18	Vinyl, card and thin sheet
4 × 2.33 in (102 × 59 mm)	1.9 mm	862 mm	8	Vinyl, card and thin sheet
6 × 3.5 in (152 × 89 mm)	2.9 mm	1,292 mm	3	Vinyl, card and thin sheet
8 × 4.66 in (203 × 118 mm)	3.9 mm	1,723 mm	2	Any material, including 3 mm wood and acrylic
12 × 7 in (305 × 178 mm)	5.8 mm	2,585 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More rhino SVG files

← Rhino on a name plaque All 13 rhinos Layered rhino in five colours →