Free Promoted to Big Sister SVG

Promoted to Big Sister stencil plate SVG

Promoted to Big Sister stencil plate, as a solid black shape
Promoted to Big Sister stencil plate. The preview is the SVG file itself.

A rounded plate with “PROMOTED TO BIG SISTER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 50 mm (3.94 × 1.96 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length1,231 mm at this size
Narrowest part1.3 mm at this size
Nodes378 curve and line segments

Measured from the file. PNG: 2,000 × 1,035 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.5 in (25 × 13 mm)0.33 mm313 mm170Too fine for most machines
2 × 1 in (51 × 25 mm)0.66 mm625 mm50Fine detail: vinyl and paper only, weed with care
3 × 1.49 in (76 × 38 mm)0.99 mm938 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.99 in (102 × 51 mm)1.3 mm1,251 mm10Vinyl, card and thin sheet
6 × 2.99 in (152 × 76 mm)2 mm1,876 mm3Vinyl, card and thin sheet
8 × 3.98 in (203 × 101 mm)2.6 mm2,501 mm2Vinyl, card and thin sheet
12 × 5.98 in (305 × 152 mm)4 mm3,752 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Big Sister SVG files

← Promoted to Big Sister outline lettering All 12 Promoted to Big Sister designs Promoted to Big Sister with a drop shadow →