Free Promoted to Big Sister SVG

Promoted to Big Sister in Amatic SC SVG

Promoted to Big Sister in Amatic SC, as a solid black shape
Promoted to Big Sister in Amatic SC. The preview is the SVG file itself.

“Promoted to Big Sister” set in Amatic SC, narrow hand-drawn capitals, on 2 centred lines. Tall, thin and slightly uneven, like lettering on a chalkboard; the strokes are thickened so they cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 59 mm (3.94 × 2.32 in), scales to any size
Pieces19 separate pieces
Outlines to cut28: 19 outer edges and 9 cut-outs
Cut length1,476 mm at this size
Narrowest part1.4 mm at this size
Nodes606 curve and line segments

Measured from the file. PNG: 2,000 × 1,210 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.59 in (25 × 15 mm)0.36 mm375 mm150Too fine for most machines
2 × 1.18 in (51 × 30 mm)0.71 mm750 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.77 in (76 × 45 mm)1.1 mm1,125 mm18Vinyl, card and thin sheet
4 × 2.36 in (102 × 60 mm)1.4 mm1,500 mm8Vinyl, card and thin sheet
6 × 3.53 in (152 × 90 mm)2.1 mm2,249 mm3Vinyl, card and thin sheet
8 × 4.71 in (203 × 120 mm)2.8 mm2,999 mm2Vinyl, card and thin sheet
12 × 7.07 in (305 × 180 mm)4.3 mm4,499 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Big Sister SVG files

← Promoted to Big Sister in Alfa Slab One All 12 Promoted to Big Sister designs Promoted to Big Sister in block capitals →