Free Promoted to Big Sister SVG

Promoted to Big Sister outline lettering SVG

Promoted to Big Sister outline lettering, drawn as a line
Promoted to Big Sister outline lettering. The preview is the SVG file itself.

“Promoted to Big Sister” as hollow letters in a chunky rounded face: each letter is drawn as a line round its own edge, with a second loop round any counter. For colouring pages, foil and pen work, or layered over the solid version in a second colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 36 mm (3.94 × 1.43 in), scales to any size
Pieces25 separate pieces
Outlines to cut63: 25 outer edges and 38 cut-outs
Cut length1,343 mm at this size
Narrowest part1.4 mm at this size
Nodes549 curve and line segments

Measured from the file. PNG: 2,000 × 773 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.36 in (25 × 9 mm)0.36 mm341 mm210Too fine for most machines
2 × 0.72 in (51 × 18 mm)0.71 mm682 mm65Fine detail: vinyl and paper only, weed with care
3 × 1.09 in (76 × 28 mm)1.1 mm1,023 mm27Vinyl, card and thin sheet
4 × 1.45 in (102 × 37 mm)1.4 mm1,364 mm14Vinyl, card and thin sheet
6 × 2.17 in (152 × 55 mm)2.1 mm2,047 mm5Vinyl, card and thin sheet
8 × 2.9 in (203 × 74 mm)2.8 mm2,729 mm3Vinyl, card and thin sheet
12 × 4.34 in (305 × 110 mm)4.3 mm4,093 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Big Sister SVG files

← Promoted to Big Sister with hearts All 12 Promoted to Big Sister designs Promoted to Big Sister stencil plate →