Free Promoted to Big Sister SVG

Promoted to Big Sister in Alfa Slab One SVG

Promoted to Big Sister in Alfa Slab One, as a solid black shape
Promoted to Big Sister in Alfa Slab One. The preview is the SVG file itself.

“Promoted to Big Sister” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 34 mm (3.94 × 1.32 in), scales to any size
Pieces20 separate pieces
Outlines to cut30: 20 outer edges and 10 cut-outs
Cut length856 mm at this size
Narrowest part1.3 mm at this size
Nodes548 curve and line segments

Measured from the file. PNG: 2,000 × 721 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.34 in (25 × 9 mm)0.33 mm217 mm220Too fine for most machines
2 × 0.67 in (51 × 17 mm)0.66 mm435 mm70Fine detail: vinyl and paper only, weed with care
3 × 1 in (76 × 26 mm)0.99 mm652 mm30Fine detail: vinyl and paper only, weed with care
4 × 1.34 in (102 × 34 mm)1.3 mm870 mm14Vinyl, card and thin sheet
6 × 2.01 in (152 × 51 mm)2 mm1,305 mm5Vinyl, card and thin sheet
8 × 2.68 in (203 × 68 mm)2.6 mm1,739 mm4Vinyl, card and thin sheet
12 × 4.02 in (305 × 102 mm)4 mm2,609 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Promoted to Big Sister SVG files

← Promoted to Big Sister in Lilita One All 12 Promoted to Big Sister designs Promoted to Big Sister in Amatic SC →