Free plant SVG

Potted plant outline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Potted plant outline, drawn as a line
Potted plant outline. The preview is the SVG file itself.

A leafy plant in a flower pot drawn as a single line 2 mm wide: a stem, seven leaves and the pot with its rim. For colouring pages, embroidery, foil and pen plotters.

What is in the file

Size46 × 100 mm (1.81 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut13: 1 outer edge and 12 cut-outs
Cut length983 mm at this size
Narrowest part1.1 mm at this size
Nodes163 curve and line segments

Measured from the file. PNG: 963 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.46 × 1 in (12 × 25 mm)0.28 mm250 mm180Too fine for most machines
0.92 × 2 in (23 × 51 mm)0.56 mm499 mm50Fine detail: vinyl and paper only, weed with care
1.38 × 3 in (35 × 76 mm)0.84 mm749 mm21Fine detail: vinyl and paper only, weed with care
1.84 × 4 in (47 × 102 mm)1.1 mm999 mm10Vinyl, card and thin sheet
2.77 × 6 in (70 × 152 mm)1.7 mm1,498 mm4Vinyl, card and thin sheet
3.69 × 8 in (94 × 203 mm)2.2 mm1,997 mm3Vinyl, card and thin sheet
5.53 × 12 in (141 × 305 mm)3.4 mm2,996 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More plant SVG files

← Three potted plants on a shelf All 12 plants Layered snake plant in three colours →