Free plant SVG

Snake plant in a pot SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Snake plant in a pot, as a solid black shape
Snake plant in a pot. The preview is the SVG file itself.

Seven stiff sword leaves of different heights, each crossed by short bands like the markings on the real plant, standing in a pot with a zigzag. Tall and narrow, for a bookmark or a door panel.

What is in the file

Size61 × 100 mm (2.39 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut29: 1 outer edge and 28 cut-outs
Cut length907 mm at this size
Narrowest part1 mm at this size
Nodes282 curve and line segments

Measured from the file. PNG: 1,246 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.61 × 1 in (15 × 25 mm)0.25 mm230 mm150Too fine for most machines
1.22 × 2 in (31 × 51 mm)0.51 mm461 mm40Fine detail: vinyl and paper only, weed with care
1.82 × 3 in (46 × 76 mm)0.76 mm691 mm18Fine detail: vinyl and paper only, weed with care
2.43 × 4 in (62 × 102 mm)1 mm922 mm8Vinyl, card and thin sheet
3.65 × 6 in (93 × 152 mm)1.5 mm1,382 mm3Vinyl, card and thin sheet
4.86 × 8 in (124 × 203 mm)2 mm1,843 mm2Vinyl, card and thin sheet
7.3 × 12 in (185 × 305 mm)3 mm2,765 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More plant SVG files

← Monstera plant in a pot All 12 plants Potted plant with oval leaves →