Free plant SVG

Fiddle leaf fig plant SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fiddle leaf fig plant, as a solid black shape
Fiddle leaf fig plant. The preview is the SVG file itself.

A slim trunk carrying six violin-shaped leaves, each with a slit for its midrib, standing in a woven basket. The tall house plant for the side of a sofa, a moving-in card or a florist sign.

What is in the file

Size56 × 100 mm (2.2 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut20: 1 outer edge and 19 cut-outs
Cut length904 mm at this size
Narrowest part1.3 mm at this size
Nodes193 curve and line segments

Measured from the file. PNG: 1,152 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.56 × 1 in (14 × 25 mm)0.33 mm230 mm160Too fine for most machines
1.12 × 2 in (28 × 51 mm)0.66 mm459 mm45Fine detail: vinyl and paper only, weed with care
1.68 × 3 in (43 × 76 mm)0.99 mm689 mm18Fine detail: vinyl and paper only, weed with care
2.24 × 4 in (57 × 102 mm)1.3 mm918 mm10Vinyl, card and thin sheet
3.35 × 6 in (85 × 152 mm)2 mm1,378 mm3Vinyl, card and thin sheet
4.47 × 8 in (114 × 203 mm)2.6 mm1,837 mm2Vinyl, card and thin sheet
6.71 × 12 in (170 × 305 mm)4 mm2,755 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More plant SVG files

← Hanging plant in a macrame hanger All 12 plants Pot plant on a stand →