Free planner SVG

To-do list planner page SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

To-do list planner page, drawn as a line
To-do list planner page. The preview is the SVG file itself.

A box for the heading and twelve lines, each with a tick box at its start, on an A5 page with six ring holes. Loose lines and boxes inside the page outline. Print or cut it 210 mm tall for an A5 page, 148 mm wide.

What is in the file

Size71 × 100 mm (2.78 × 3.94 in), scales to any size
Pieces26 separate pieces
Outlines to cut46: 26 outer edges and 20 cut-outs
Cut length2,525 mm at this size
Narrowest part1.2 mm at this size
Nodes266 curve and line segments

Measured from the file. PNG: 1,433 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.3 mm641 mm130Too fine for most machines
1.41 × 2 in (36 × 51 mm)0.61 mm1,283 mm35Fine detail: vinyl and paper only, weed with care
2.11 × 3 in (54 × 76 mm)0.91 mm1,924 mm15Fine detail: vinyl and paper only, weed with care
2.82 × 4 in (72 × 102 mm)1.2 mm2,565 mm8Vinyl, card and thin sheet
4.23 × 6 in (107 × 152 mm)1.8 mm3,848 mm2Vinyl, card and thin sheet
5.64 × 8 in (143 × 203 mm)2.4 mm5,131 mm2Vinyl, card and thin sheet
8.46 × 12 in (215 × 305 mm)3.7 mm7,696 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More planner SVG files

← Weekly habit tracker planner page All 15 planner pages and stickers Six hole planner insert template →