Free pit bull SVG

Pit bull mum and pup SVG

Pit bull mum and pup, as a solid black shape — Pit bull mum and pup. The preview is the SVG file itself.

A pit bull sitting with her pup in front of her, both looking the same way. The pup leans back against her front leg, so the pair cut as one piece.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 76 mm (3.94 × 2.99 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	588 mm at this size
Narrowest part	2 mm at this size
Nodes	229 curve and line segments

Measured from the file. PNG: 2,000 × 1,537 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.76 in (25 × 19 mm)	0.51 mm	149 mm	120	Fine detail: vinyl and paper only, weed with care
2 × 1.52 in (51 × 39 mm)	1 mm	299 mm	35	Vinyl, card and thin sheet
3 × 2.28 in (76 × 58 mm)	1.5 mm	448 mm	12	Vinyl, card and thin sheet
4 × 3.04 in (102 × 77 mm)	2 mm	597 mm	6	Vinyl, card and thin sheet
6 × 4.55 in (152 × 116 mm)	3 mm	896 mm	2	Any material, including 3 mm wood and acrylic
8 × 6.07 in (203 × 154 mm)	4.1 mm	1,195 mm	1	Any material, including 3 mm wood and acrylic
12 × 9.11 in (305 × 231 mm)	6.1 mm	1,792 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pit bull SVG files

← Pit bull monogram frame All 15 pit bulls Layered smiling pit bull in four colours →