Free pit bull SVG

Pit bull outline SVG

Pit bull outline, drawn as a line — Pit bull outline. The preview is the SVG file itself.

The standing pit bull as one even line about 2 mm wide in a closed loop, with nothing inside it. For colouring pages, foil, engraving and pen plotters.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	3: 1 outer edge and 2 cut-outs
Cut length	785 mm at this size
Narrowest part	3.3 mm at this size
Nodes	335 curve and line segments

Measured from the file. PNG: 2,000 × 1,371 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.67 in (25 × 17 mm)	0.84 mm	199 mm	130	Fine detail: vinyl and paper only, weed with care
2 × 1.35 in (51 × 34 mm)	1.7 mm	399 mm	35	Vinyl, card and thin sheet
3 × 2.02 in (76 × 51 mm)	2.5 mm	598 mm	15	Vinyl, card and thin sheet
4 × 2.69 in (102 × 68 mm)	3.4 mm	798 mm	8	Any material, including 3 mm wood and acrylic
6 × 4.04 in (152 × 103 mm)	5 mm	1,196 mm	2	Any material, including 3 mm wood and acrylic
8 × 5.38 in (203 × 137 mm)	6.7 mm	1,595 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.08 in (305 × 205 mm)	10 mm	2,393 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pit bull SVG files

← Cute pit bull sitting All 15 pit bulls Pit bull in a heart →