Free pit bull SVG

Pit bull standing SVG

Pit bull standing, as a solid black shape — Pit bull standing. The preview is the SVG file itself.

A pit bull in side view: a broad head with a deep square muzzle, a thick neck, a deep chest, a tucked waist and a whip tail carried low. Slits mark the eye, ear, smile, shoulder and thigh.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 67 mm (3.94 × 2.65 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	530 mm at this size
Narrowest part	1.8 mm at this size
Nodes	218 curve and line segments

Measured from the file. PNG: 2,000 × 1,371 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.67 in (25 × 17 mm)	0.46 mm	135 mm	130	Too fine for most machines
2 × 1.35 in (51 × 34 mm)	0.91 mm	269 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.02 in (76 × 51 mm)	1.4 mm	404 mm	15	Vinyl, card and thin sheet
4 × 2.69 in (102 × 68 mm)	1.8 mm	538 mm	8	Vinyl, card and thin sheet
6 × 4.04 in (152 × 103 mm)	2.7 mm	808 mm	2	Vinyl, card and thin sheet
8 × 5.38 in (203 × 137 mm)	3.7 mm	1,077 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.08 in (305 × 205 mm)	5.5 mm	1,615 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pit bull SVG files

← Layered smiling pit bull in four colours All 15 pit bulls Pit bull face →