Free pit bull SVG

Smiling pit bull SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Smiling pit bull, as a solid black shape
Smiling pit bull. The preview is the SVG file itself.

The famous grin: the same broad head with the mouth wide open and the tongue hanging over the lower lip. The mouth is one cut-out and the tongue stays joined to the jaw.

What is in the file

Size97 × 100 mm (3.83 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut19: 1 outer edge and 18 cut-outs
Cut length882 mm at this size
Narrowest part1 mm at this size
Nodes277 curve and line segments
Also found asSmiling pitbull SVG

Measured from the file. PNG: 1,948 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.97 × 1 in (25 × 25 mm)0.25 mm224 mm100Too fine for most machines
1.95 × 2 in (49 × 51 mm)0.51 mm448 mm25Fine detail: vinyl and paper only, weed with care
2.92 × 3 in (74 × 76 mm)0.76 mm672 mm9Fine detail: vinyl and paper only, weed with care
3.89 × 4 in (99 × 102 mm)1 mm896 mm4Vinyl, card and thin sheet
5.84 × 6 in (148 × 152 mm)1.5 mm1,344 mm2Vinyl, card and thin sheet
7.78 × 8 in (198 × 203 mm)2 mm1,792 mm1Vinyl, card and thin sheet
11.68 × 12 in (297 × 305 mm)3 mm2,688 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pit bull SVG files

← Pit bull standing All 15 pit bulls Sitting pit bull silhouette →