Short pencil stub SVG
A well-used pencil sharpened down to a stub, as thick as it is short. Its parts are big for its size, so it cuts cleanly as a small sticker.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 6: 1 outer edge and 5 cut-outs |
| Cut length | 558 mm at this size |
| Narrowest part | 2.8 mm at this size |
| Nodes | 50 curve and line segments |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.71 mm | 142 mm | 140 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.33 in (51 × 34 mm) | 1.4 mm | 283 mm | 35 | Vinyl, card and thin sheet |
| 3 × 2 in (76 × 51 mm) | 2.1 mm | 425 mm | 15 | Vinyl, card and thin sheet |
| 4 × 2.66 in (102 × 68 mm) | 2.8 mm | 567 mm | 8 | Vinyl, card and thin sheet |
| 6 × 3.99 in (152 × 101 mm) | 4.3 mm | 850 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 5.32 in (203 × 135 mm) | 5.7 mm | 1,134 mm | 2 | Any material, including 3 mm wood and acrylic |
| 12 × 7.98 in (305 × 203 mm) | 8.5 mm | 1,701 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pencil on a slant 
Pencil lying level 
Pencil outline 
Two crossed pencils 
Split pencil for a name 
Fat pencil for a name 
Pencil monogram frame 
Pencil cup 