Free pencil SVG

Fat pencil for a name SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Fat pencil for a name, as a solid black shape
Fat pencil for a name. The preview is the SVG file itself.

A short, thick pencil with a plain body and no facet lines, so the whole side is free for a name. Good for desk plates, drawer labels and coat pegs.

What is in the file

Size100 × 26 mm (3.94 × 1.04 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut4: 1 outer edge and 3 cut-outs
Cut length367 mm at this size
Narrowest part1.9 mm at this size
Nodes36 curve and line segments

Measured from the file. PNG: 2,000 × 585 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.26 in (25 × 7 mm)0.48 mm93 mm260Too fine for most machines
2 × 0.53 in (51 × 13 mm)0.97 mm186 mm80Fine detail: vinyl and paper only, weed with care
3 × 0.79 in (76 × 20 mm)1.4 mm280 mm36Vinyl, card and thin sheet
4 × 1.06 in (102 × 27 mm)1.9 mm373 mm18Vinyl, card and thin sheet
6 × 1.58 in (152 × 40 mm)2.9 mm559 mm6Vinyl, card and thin sheet
8 × 2.11 in (203 × 54 mm)3.9 mm746 mm5Any material, including 3 mm wood and acrylic
12 × 3.17 in (305 × 80 mm)5.8 mm1,119 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pencil SVG files

← Split pencil for a name All 14 pencils Pencil monogram frame →