Free pencil SVG

Split pencil for a name SVG

Split pencil for a name, as a solid black shape — Split pencil for a name. The preview is the SVG file itself.

A fat pencil cut in two along its length with a clear band between the halves, where a name goes. Two pieces, each with half the eraser and half the point.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 47 mm (3.94 × 1.87 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	684 mm at this size
Narrowest part	2.4 mm at this size
Nodes	63 curve and line segments

Measured from the file. PNG: 2,000 × 988 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.47 in (25 × 12 mm)	0.61 mm	174 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.95 in (51 × 24 mm)	1.2 mm	347 mm	50	Vinyl, card and thin sheet
3 × 1.42 in (76 × 36 mm)	1.8 mm	521 mm	21	Vinyl, card and thin sheet
4 × 1.9 in (102 × 48 mm)	2.4 mm	695 mm	10	Vinyl, card and thin sheet
6 × 2.84 in (152 × 72 mm)	3.7 mm	1,042 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.79 in (203 × 96 mm)	4.9 mm	1,390 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.69 in (305 × 144 mm)	7.3 mm	2,085 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pencil SVG files

← Two crossed pencils All 14 pencils Fat pencil for a name →