Free paper flower SVG

Paper flower dahlia with 24 petals SVG

Paper flower dahlia with 24 petals, as a solid black shape
Paper flower dahlia with 24 petals. The preview is the SVG file itself.

Every piece of a dahlia: ten pointed petals 50 mm tall at this size, eight of 40 mm and six of 30 mm, each with a slit that laps into a scoop, a base circle and a spiky bud for the middle. Cut 250 mm wide, the flower is about 95 mm across. Loose pieces.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 57 mm (3.94 × 2.22 in), scales to any size
Pieces26 separate pieces
Outlines to cut26 outlines
Cut length1,293 mm at this size
Narrowest part3.6 mm at this size
Nodes366 curve and line segments

Measured from the file. PNG: 2,000 × 1,163 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.57 in (25 × 14 mm)0.91 mm328 mm150Fine detail: vinyl and paper only, weed with care
2 × 1.13 in (51 × 29 mm)1.8 mm657 mm45Vinyl, card and thin sheet
3 × 1.7 in (76 × 43 mm)2.7 mm985 mm18Vinyl, card and thin sheet
4 × 2.26 in (102 × 57 mm)3.7 mm1,314 mm8Any material, including 3 mm wood and acrylic
6 × 3.39 in (152 × 86 mm)5.5 mm1,971 mm3Any material, including 3 mm wood and acrylic
8 × 4.52 in (203 × 115 mm)7.3 mm2,627 mm2Any material, including 3 mm wood and acrylic
12 × 6.78 in (305 × 172 mm)11 mm3,941 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More paper flower SVG files

← Paper flower daisy with a domed centre All 13 paper flowers Paper flower anemone template →