Mommy’s Little Monster stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “MOMMY’S LITTLE MONSTER” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 49 mm (3.94 × 1.92 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 21: 1 outer edge and 20 cut-outs |
| Cut length | 1,159 mm at this size |
| Narrowest part | 1.2 mm at this size |
| Nodes | 371 curve and line segments |
Measured from the file. PNG: 2,000 × 1,013 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.49 in (25 × 12 mm) | 0.3 mm | 294 mm | 170 | Too fine for most machines |
| 2 × 0.97 in (51 × 25 mm) | 0.61 mm | 589 mm | 50 | Fine detail: vinyl and paper only, weed with care |
| 3 × 1.46 in (76 × 37 mm) | 0.91 mm | 883 mm | 21 | Fine detail: vinyl and paper only, weed with care |
| 4 × 1.95 in (102 × 49 mm) | 1.2 mm | 1,178 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.92 in (152 × 74 mm) | 1.8 mm | 1,766 mm | 3 | Vinyl, card and thin sheet |
| 8 × 3.9 in (203 × 99 mm) | 2.4 mm | 2,355 mm | 2 | Vinyl, card and thin sheet |
| 12 × 5.84 in (305 × 148 mm) | 3.7 mm | 3,533 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mommy’s Little Monster SVG files
-
Mommy’s Little Monster with a drop shadow Layered · 10 pieces
-
Mommy’s Little Monster with a jack-o’-lantern Solid · 17 pieces
-
Mommy’s Little Monster in Pacifico Solid · 6 pieces
-
Mommy’s Little Monster in Lobster Solid · 9 pieces
-
Mommy’s Little Monster in Lilita One Solid · 21 pieces
-
Mommy’s Little Monster in Amatic SC Solid · 20 pieces
-
Mommy’s Little Monster in block capitals Solid · 20 pieces
-
Mommy’s Little Monster in script and capitals Solid · 16 pieces
← Mommy’s Little Monster outline lettering All 11 Mommy’s Little Monster designs Mommy’s Little Monster with a drop shadow →