Free Mommy’s Little Monster SVG

Mommy’s Little Monster in Lobster SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mommy’s Little Monster in Lobster, as a solid black shape
Mommy’s Little Monster in Lobster. The preview is the SVG file itself.

“Mommy’s Little Monster” set in Lobster, a bold upright script, on 2 centred lines. Upright and heavy, it stays readable from across a room and weeds easily.

What is in the file

Size100 × 47 mm (3.94 × 1.84 in), scales to any size
Pieces9 separate pieces
Outlines to cut16: 9 outer edges and 7 cut-outs
Cut length1,073 mm at this size
Narrowest part0.7 mm at this size
Nodes369 curve and line segments

Measured from the file. PNG: 2,000 × 975 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.47 in (25 × 12 mm)0.18 mm273 mm180Too fine for most machines
2 × 0.93 in (51 × 24 mm)0.36 mm545 mm50Too fine for most machines
3 × 1.4 in (76 × 36 mm)0.53 mm818 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.87 in (102 × 47 mm)0.71 mm1,090 mm10Fine detail: vinyl and paper only, weed with care
6 × 2.8 in (152 × 71 mm)1.1 mm1,635 mm4Vinyl, card and thin sheet
8 × 3.74 in (203 × 95 mm)1.4 mm2,180 mm3Vinyl, card and thin sheet
12 × 5.6 in (305 × 142 mm)2.1 mm3,271 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mommy’s Little Monster SVG files

← Mommy’s Little Monster in Pacifico All 11 Mommy’s Little Monster designs Mommy’s Little Monster in Lilita One →