Mommy’s Little Monster with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Mommy’s Little Monster” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.62 in), scales to any size |
|---|---|
| Pieces | 10 separate pieces |
| Outlines to cut | 25: 10 outer edges and 15 cut-outs |
| Cut length | 1,489 mm at this size |
| Narrowest part | 3.1 mm at this size |
| Nodes | 669 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 867 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.79 mm | 378 mm | 190 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.82 in (51 × 21 mm) | 1.6 mm | 756 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.23 in (76 × 31 mm) | 2.4 mm | 1,135 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.64 in (102 × 42 mm) | 3.1 mm | 1,513 mm | 12 | Any material, including 3 mm wood and acrylic |
| 6 × 2.47 in (152 × 63 mm) | 4.7 mm | 2,269 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.29 in (203 × 84 mm) | 6.3 mm | 3,026 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.93 in (305 × 125 mm) | 9.4 mm | 4,538 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Mommy’s Little Monster SVG files
-
Mommy’s Little Monster with a jack-o’-lantern Solid · 17 pieces
-
Mommy’s Little Monster in Pacifico Solid · 6 pieces
-
Mommy’s Little Monster in Lobster Solid · 9 pieces
-
Mommy’s Little Monster in Lilita One Solid · 21 pieces
-
Mommy’s Little Monster in Amatic SC Solid · 20 pieces
-
Mommy’s Little Monster in block capitals Solid · 20 pieces
-
Mommy’s Little Monster in script and capitals Solid · 16 pieces
-
Mommy’s Little Monster with stars Solid · 15 pieces
← Mommy’s Little Monster stencil plate All 11 Mommy’s Little Monster designs Mommy’s Little Monster with a jack-o’-lantern →