Free Mommy’s Little Monster SVG

Mommy’s Little Monster in Lilita One SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Mommy’s Little Monster in Lilita One, as a solid black shape
Mommy’s Little Monster in Lilita One. The preview is the SVG file itself.

“Mommy’s Little Monster” set in Lilita One, a chunky rounded sans, on 2 centred lines. The strokes are thick and the corners soft, so it is the easiest version to cut small.

What is in the file

Size100 × 30 mm (3.94 × 1.18 in), scales to any size
Pieces21 separate pieces
Outlines to cut25: 21 outer edges and 4 cut-outs
Cut length800 mm at this size
Narrowest part1.9 mm at this size
Nodes316 curve and line segments

Measured from the file. PNG: 2,000 × 654 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.3 in (25 × 8 mm)0.48 mm203 mm240Too fine for most machines
2 × 0.6 in (51 × 15 mm)0.97 mm406 mm75Fine detail: vinyl and paper only, weed with care
3 × 0.9 in (76 × 23 mm)1.4 mm610 mm33Vinyl, card and thin sheet
4 × 1.2 in (102 × 30 mm)1.9 mm813 mm16Vinyl, card and thin sheet
6 × 1.8 in (152 × 46 mm)2.9 mm1,219 mm6Vinyl, card and thin sheet
8 × 2.4 in (203 × 61 mm)3.9 mm1,626 mm4Any material, including 3 mm wood and acrylic
12 × 3.6 in (305 × 91 mm)5.8 mm2,438 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Mommy’s Little Monster SVG files

← Mommy’s Little Monster in Lobster All 11 Mommy’s Little Monster designs Mommy’s Little Monster in Amatic SC →