Free mitten SVG

Mitten with a snowflake SVG

Mitten with a snowflake, as a solid black shape — Mitten with a snowflake. The preview is the SVG file itself.

A six-armed snowflake cut from the back of the hand, over a ribbed cuff. The snowflake is a single hole, so there is nothing loose to lose.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	929 mm at this size
Narrowest part	2.2 mm at this size
Nodes	185 curve and line segments

Measured from the file. PNG: 1,408 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.56 mm	236 mm	130	Fine detail: vinyl and paper only, weed with care
1.38 × 2 in (35 × 51 mm)	1.1 mm	472 mm	35	Vinyl, card and thin sheet
2.08 × 3 in (53 × 76 mm)	1.7 mm	708 mm	15	Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)	2.2 mm	944 mm	8	Vinyl, card and thin sheet
4.15 × 6 in (105 × 152 mm)	3.4 mm	1,416 mm	2	Any material, including 3 mm wood and acrylic
5.54 × 8 in (141 × 203 mm)	4.5 mm	1,888 mm	2	Any material, including 3 mm wood and acrylic
8.3 × 12 in (211 × 305 mm)	6.7 mm	2,832 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mitten SVG files

← Mitten outline All 19 mittens Mitten with a heart →