Free mitten SVG

Mitten with stars SVG

Mitten with stars, as a solid black shape — Mitten with stars. The preview is the SVG file itself.

Five-pointed stars of three sizes scattered over the hand and one on the thumb, above a plain cuff with a fold line.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	92 × 100 mm (3.64 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	10: 1 outer edge and 9 cut-outs
Cut length	898 mm at this size
Narrowest part	3.5 mm at this size
Nodes	111 curve and line segments

Measured from the file. PNG: 1,854 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.92 × 1 in (23 × 25 mm)	0.89 mm	228 mm	100	Fine detail: vinyl and paper only, weed with care
1.85 × 2 in (47 × 51 mm)	1.8 mm	456 mm	25	Vinyl, card and thin sheet
2.77 × 3 in (70 × 76 mm)	2.7 mm	684 mm	12	Vinyl, card and thin sheet
3.7 × 4 in (94 × 102 mm)	3.6 mm	912 mm	6	Any material, including 3 mm wood and acrylic
5.54 × 6 in (141 × 152 mm)	5.3 mm	1,369 mm	2	Any material, including 3 mm wood and acrylic
7.39 × 8 in (188 × 203 mm)	7.1 mm	1,825 mm	1	Any material, including 3 mm wood and acrylic
11.09 × 12 in (282 × 305 mm)	11 mm	2,737 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mitten SVG files

← Striped mitten All 19 mittens Nordic star mitten →