Free mitten SVG

Nordic star mitten SVG

Nordic star mitten. The preview is the SVG file itself.

The eight-petal star of Norwegian knitting cut from the back of the hand, with a diamond in each corner and a zigzag border above and below. A Scandinavian mitten in one colour.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	69 × 100 mm (2.72 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	24: 1 outer edge and 23 cut-outs
Cut length	1,162 mm at this size
Narrowest part	2.8 mm at this size
Nodes	159 curve and line segments

Measured from the file. PNG: 1,408 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.69 × 1 in (18 × 25 mm)	0.71 mm	295 mm	130	Fine detail: vinyl and paper only, weed with care
1.38 × 2 in (35 × 51 mm)	1.4 mm	590 mm	35	Vinyl, card and thin sheet
2.08 × 3 in (53 × 76 mm)	2.1 mm	885 mm	15	Vinyl, card and thin sheet
2.77 × 4 in (70 × 102 mm)	2.8 mm	1,181 mm	8	Vinyl, card and thin sheet
4.15 × 6 in (105 × 152 mm)	4.3 mm	1,771 mm	2	Any material, including 3 mm wood and acrylic
5.54 × 8 in (141 × 203 mm)	5.7 mm	2,361 mm	2	Any material, including 3 mm wood and acrylic
8.3 × 12 in (211 × 305 mm)	8.5 mm	3,542 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mitten SVG files

← Mitten with stars All 19 mittens Polka dot mitten →