Free mitten SVG

Crossed pair of mittens SVG

Crossed pair of mittens, as a solid black shape — Crossed pair of mittens. The preview is the SVG file itself.

Two mittens laid one over the other at an angle, the front one set off from the back one by a thin gap. A pair without a string, for cards and tags.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 88 mm (3.94 × 3.47 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	768 mm at this size
Narrowest part	1.8 mm at this size
Nodes	116 curve and line segments

Measured from the file. PNG: 2,000 × 1,771 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.88 in (25 × 22 mm)	0.46 mm	195 mm	110	Too fine for most machines
2 × 1.76 in (51 × 45 mm)	0.91 mm	390 mm	30	Fine detail: vinyl and paper only, weed with care
3 × 2.64 in (76 × 67 mm)	1.4 mm	585 mm	12	Vinyl, card and thin sheet
4 × 3.52 in (102 × 90 mm)	1.8 mm	780 mm	6	Vinyl, card and thin sheet
6 × 5.29 in (152 × 134 mm)	2.7 mm	1,170 mm	2	Vinyl, card and thin sheet
8 × 7.05 in (203 × 179 mm)	3.7 mm	1,561 mm	1	Any material, including 3 mm wood and acrylic
12 × 10.57 in (305 × 269 mm)	5.5 mm	2,341 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More mitten SVG files

← Knitted stitch mitten All 19 mittens Two-colour mitten in pieces →