Free Milk for Santa SVG

Milk for Santa stencil plate SVG

Milk for Santa stencil plate, as a solid black shape — Milk for Santa stencil plate. The preview is the SVG file itself.

A rounded plate with “MILK FOR SANTA” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 68 mm (3.94 × 2.67 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	13: 1 outer edge and 12 cut-outs
Cut length	1,352 mm at this size
Narrowest part	1.5 mm at this size
Nodes	280 curve and line segments

Measured from the file. PNG: 2,000 × 1,383 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.68 in (25 × 17 mm)	0.38 mm	343 mm	130	Too fine for most machines
2 × 1.36 in (51 × 34 mm)	0.76 mm	687 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.04 in (76 × 52 mm)	1.1 mm	1,030 mm	15	Vinyl, card and thin sheet
4 × 2.72 in (102 × 69 mm)	1.5 mm	1,374 mm	8	Vinyl, card and thin sheet
6 × 4.07 in (152 × 103 mm)	2.3 mm	2,060 mm	2	Vinyl, card and thin sheet
8 × 5.43 in (203 × 138 mm)	3 mm	2,747 mm	2	Any material, including 3 mm wood and acrylic
12 × 8.15 in (305 × 207 mm)	4.6 mm	4,121 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Milk for Santa SVG files

← Milk for Santa outline lettering All 12 Milk for Santa designs Milk for Santa with a drop shadow →