Milk for Santa in Alfa Slab One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Milk for Santa” set in Alfa Slab One, a very heavy slab serif, on 2 centred lines. Thick strokes and blunt square serifs give it the weight of a poster headline.
What is in the file
| Size | 100 × 47 mm (3.94 × 1.83 in), scales to any size |
|---|---|
| Pieces | 13 separate pieces |
| Outlines to cut | 16: 13 outer edges and 3 cut-outs |
| Cut length | 878 mm at this size |
| Narrowest part | 2.3 mm at this size |
| Nodes | 236 curve and line segments |
Measured from the file. PNG: 2,000 × 971 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.47 in (25 × 12 mm) | 0.58 mm | 223 mm | 180 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.93 in (51 × 24 mm) | 1.2 mm | 446 mm | 50 | Vinyl, card and thin sheet |
| 3 × 1.39 in (76 × 35 mm) | 1.8 mm | 669 mm | 21 | Vinyl, card and thin sheet |
| 4 × 1.86 in (102 × 47 mm) | 2.3 mm | 892 mm | 10 | Vinyl, card and thin sheet |
| 6 × 2.79 in (152 × 71 mm) | 3.5 mm | 1,338 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.72 in (203 × 94 mm) | 4.7 mm | 1,784 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 5.58 in (305 × 142 mm) | 7 mm | 2,676 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Milk for Santa SVG files
-
Milk for Santa in Amatic SC Solid · 12 pieces
-
Milk for Santa in block capitals Solid · 12 pieces
-
Milk for Santa in script and capitals Solid · 8 pieces
-
Milk for Santa with stars Solid · 13 pieces
-
Milk for Santa outline lettering Outline · 14 pieces
-
Milk for Santa stencil plate Solid · one piece
-
Milk for Santa with a drop shadow Layered · 8 pieces
-
Milk for Santa with a Santa hat Solid · 9 pieces
← Milk for Santa in Lilita One All 13 Milk for Santa designs Milk for Santa in Amatic SC →