Milk for Santa with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Milk for Santa” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 67 mm (3.94 × 2.62 in), scales to any size |
|---|---|
| Pieces | 8 separate pieces |
| Outlines to cut | 22: 8 outer edges and 14 cut-outs |
| Cut length | 1,731 mm at this size |
| Narrowest part | 0.6 mm at this size |
| Nodes | 527 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 1,356 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.67 in (25 × 17 mm) | 0.15 mm | 440 mm | 140 | Too fine for most machines |
| 2 × 1.33 in (51 × 34 mm) | 0.3 mm | 879 mm | 35 | Too fine for most machines |
| 3 × 2 in (76 × 51 mm) | 0.46 mm | 1,319 mm | 15 | Too fine for most machines |
| 4 × 2.66 in (102 × 68 mm) | 0.61 mm | 1,759 mm | 8 | Fine detail: vinyl and paper only, weed with care |
| 6 × 3.99 in (152 × 101 mm) | 0.91 mm | 2,638 mm | 2 | Fine detail: vinyl and paper only, weed with care |
| 8 × 5.32 in (203 × 135 mm) | 1.2 mm | 3,517 mm | 2 | Vinyl, card and thin sheet |
| 12 × 7.98 in (305 × 203 mm) | 1.8 mm | 5,276 mm | 1 | Vinyl, card and thin sheet |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Milk for Santa SVG files
-
Milk for Santa with a Santa hat Solid · 9 pieces
-
Milk for Santa in Pacifico Solid · 5 pieces
-
Milk for Santa in Lobster Solid · 7 pieces
-
Milk for Santa in Kaushan Script Solid · 13 pieces
-
Milk for Santa in Lilita One Solid · 13 pieces
-
Milk for Santa in Alfa Slab One Solid · 13 pieces
-
Milk for Santa in Amatic SC Solid · 12 pieces
-
Milk for Santa in block capitals Solid · 12 pieces
← Milk for Santa stencil plate All 13 Milk for Santa designs Milk for Santa with a Santa hat →