Free Milk for Santa SVG

Milk for Santa in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Milk for Santa in Pacifico, as a solid black shape
Milk for Santa in Pacifico. The preview is the SVG file itself.

“Milk for Santa” set in Pacifico, a bold brush script, on 2 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 66 mm (3.94 × 2.58 in), scales to any size
Pieces5 separate pieces
Outlines to cut12: 5 outer edges and 7 cut-outs
Cut length1,054 mm at this size
Narrowest part1.6 mm at this size
Nodes350 curve and line segments

Measured from the file. PNG: 2,000 × 1,337 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.66 in (25 × 17 mm)0.41 mm268 mm140Too fine for most machines
2 × 1.31 in (51 × 33 mm)0.81 mm535 mm40Fine detail: vinyl and paper only, weed with care
3 × 1.97 in (76 × 50 mm)1.2 mm803 mm15Vinyl, card and thin sheet
4 × 2.62 in (102 × 67 mm)1.6 mm1,071 mm8Vinyl, card and thin sheet
6 × 3.93 in (152 × 100 mm)2.4 mm1,606 mm2Vinyl, card and thin sheet
8 × 5.24 in (203 × 133 mm)3.3 mm2,142 mm2Any material, including 3 mm wood and acrylic
12 × 7.86 in (305 × 200 mm)4.9 mm3,213 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Milk for Santa SVG files

← Milk for Santa with a Santa hat All 13 Milk for Santa designs Milk for Santa in Lobster →