Free martini SVG

Dirty martini with three olives SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Dirty martini with three olives, as a solid black shape
Dirty martini with three olives. The preview is the SVG file itself.

A glass filled close to the brim, with three olives on a long pick laid flat across the rim. Two short posts weld the pick to the rim, and each olive has its pimento cut as a round hole.

What is in the file

Size60 × 100 mm (2.36 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut9: 1 outer edge and 8 cut-outs
Cut length565 mm at this size
Narrowest part2.1 mm at this size
Nodes79 curve and line segments

Measured from the file. PNG: 1,231 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.6 × 1 in (15 × 25 mm)0.53 mm144 mm150Fine detail: vinyl and paper only, weed with care
1.2 × 2 in (30 × 51 mm)1.1 mm287 mm40Vinyl, card and thin sheet
1.8 × 3 in (46 × 76 mm)1.6 mm431 mm18Vinyl, card and thin sheet
2.4 × 4 in (61 × 102 mm)2.1 mm574 mm8Vinyl, card and thin sheet
3.6 × 6 in (91 × 152 mm)3.2 mm861 mm3Any material, including 3 mm wood and acrylic
4.8 × 8 in (122 × 203 mm)4.3 mm1,148 mm2Any material, including 3 mm wood and acrylic
7.2 × 12 in (183 × 305 mm)6.4 mm1,722 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More martini SVG files

← Vodka martini with a lemon twist All 17 martinis Martini olives on a pick →